Installing Cables - Huawei UPS5000-H User Manual

100 kva power modules

Hide thumbs Also See for UPS5000-H:

Table of Contents

UPS5000-H-(1200 kVA-1600 kVA)

User Manual (100 kVA Power Modules)

Figure 6-187 Installing rectifiers and baffle plates

6.4.4.3 Installing Cables

Step 1 Install cables by referring to Single UPS Installation (1200 kVA, Three-Phase

Three-Wire) > Installation in Standard Configuration > Installing Cables.

Step 2 Remove the front cover from the UPS.

Step 3 Remove an accessory cover from the top of the top air-flow cabinet.

Step 4 Connect the power cable to the 380~480V System port on the UPS and the signal

cable to the XS2 port.

Issue 05 (2021-10-13)

6 Installation