Floating IP Configuration
416
G8264 Command Reference for ENOS 8.4
Floating IP address feature allows you to configure an additional IP address on the
management interfaces. This additional address is located in the same subnet as
the MGT interface and it is active only on master. In case of master failover, the
new master installs this address and sends out an ARP, announcing the new MAC.
Table 190.
Stacking Management Interface Options
Command Syntax and Usage
floating ip address <IP address> <IP netmask>
Configures floating IPv4 address and netmask.
Command mode: Interface IP 128
no floating
Removes the floating IPv4 address.
Command mode: Interface IP 128
show interface ip [<128>]
Displays current IP address information. If floating ip address is present, the
word floating is displayed next to it.
Command mode: All