52
G8264 Command Reference for ENOS 8.4
Table 19.
Stacking Information Options
Command Syntax and Usage
show interface link switch <configured switch number (1‐8)> type
{external|nonstacking|stacking}
Displays link information for all the ports of the specified configured switch
that match one of the following options:
external displays link information for external ports only
mgmt displays link information for management ports only
nonmgmt displays link information for non‐management ports only
nonstacking displays link information for non‐stacking ports only
qsfp displays link information for QSFP+ ports only
stacking displays link information for stacking ports only
Note: This command is available only on the master switch.
Command mode: All
show sysinfo swn <attached switch number (1‐16)>
Displays system information for the specified attached switch, including:
System date and time
Switch model name and number
Switch name and location
Time of last boot
MAC address of the switch management processor
IP address of management interface
Hardware version and part number
Software image file and version number
Configuration name
Log‐in banner, if one is configured
Internal temperatures
Fan status
Power supply status
Note: This command is available only on the master switch.
Command mode: All
show stack attachedswitches
Displays the attached switches in the stack.
Note: This command is available only on the master switch.
Command mode: All
show stack backup
Displays the csnum (configured switch number) of the backup switch.
Command mode: All