Lenovo RackSwitch G8264 Command Reference Manual page 609

© Copyright Lenovo 2017
Table 334.
VRRP Virtual Router Group Configuration Options (continued)
Command Syntax and Usage
group track
Enables the priority system used when electing the master router from a pool
of virtual router groups. To view command options, see page
Command mode: Router VRRP
group virtual­router­id <1‐255>
Defines the virtual router ID (VRID).
The VRID for standard virtual routers (where the virtual router IP address is
not the same as any virtual server) can be any integer between 1 and 128. All
VRID values must be unique within the VLAN to which the virtual router's IP
interface (see interface) belongs.
The default virtual router ID is 1.
Command mode: Router VRRP
no group
Deletes the virtual router group from the switch configuration.
Command mode: Router VRRP
show ip vrrp group
Displays the current configuration information for the virtual router group.
Command mode: All
610.
Chapter 4: Configuration Commands
609