Port Statistics
214
G8264 Command Reference for ENOS 8.4
These commands display traffic statistics on a port‐by‐port basis. Traffic statistics
include SNMP Management Information Base (MIB) objects.
Table 89.
Port Statistics Commands
Command Syntax and Usage
show interface port <port alias or number> bitrateusage
Displays the traffic rate in kilobits per second.
Command mode: All
show interface port <port alias or number> bridgingcounters
Displays bridging ("dot1") statistics for the port. See page
output.
Command mode: All
show interface port <port alias or number> bridgingrate
Displays per‐second bridging ("dot1") statistics for the port.
Command mode: All
show interface port <port alias or number> dot1x counters
Displays IEEE 802.1X statistics for the port. See page
Command mode: All
show interface port <port alias or number> egressqueuecounters
[<queue number (0‐7)>|drop]
Displays the total number of packets and bytes either successfully transmitted
or dropped for each queue of the specified ports.
queue number filters the output to the specified queue number
drop lists only the queues with dropped traffic (non‐zero counters for
dropped packets/bytes counters)
See page
233 for sample output.
Command mode: All
show interface port <port alias or number> egressqueuerate
[<queue number (0‐7)>|drop]
Displays the number of packets and bytes per second either successfully
transmitted or dropped for each queue of the specified ports.
queue number filters the output to the specified queue number
drop lists only the queues with dropped traffic (non‐zero rates for dropped
packets/bytes)
See page
234 for sample output.
Command mode: All
222 for sample
217 for sample output.