Temporarily Disabling A Port - Lenovo RackSwitch G8264 Command Reference Manual

Temporarily Disabling a Port

408
G8264 Command Reference for ENOS 8.4
To temporarily disable a port without changing its stored configuration attributes,
enter the following command at any prompt:
RS G8264(config)# interface port <port alias or number> shutdown
Because this configuration sets a temporary state for the port, you do not need to
use a save operation. The port state will revert to its original configuration when
the RackSwitch G8264 is rebooted. See the "Operations Commands" on page
for other operations‐level commands.
685