Virtual NIC Configuration
vNIC Port Configuration
© Copyright Lenovo 2017
The following table describes the Virtual NIC (vNIC) configuration options.
Table 368.
Virtual NIC Options
Command Syntax and Usage
[no] vnic enable
Globally enables or disables vNIC.
Command mode: Global configuration
[no] vnic uplinkshare
Enable or disable vNIC shared mode. When enabled, multiple vNIC groups
can be assigned to an uplink port.
Command mode: Global configuration
show vnic
Displays the current vNIC parameters.
Command mode: All
The following table describes the Virtual NIC (vNIC) port configuration options.
Table 369.
vNIC Port Configuration Options
Command Syntax and Usage
vnic port <port alias or number> index <1‐4>
Enters vNIC Configuration mode.
Note: This command is valid for internal server ports only.
Command mode: Global configuration
bandwidth <1‐100>
Configures the maximum bandwidth allocated to this vNIC, in increments of
100 Mbps. For example:
1 = 100 Mbps
10 = 1000 Mbps
Command mode: vNIC configuration
[no] enable
Enables or disables the vNIC.
Command mode: vNIC configuration
Chapter 4: Configuration Commands
647