Scheduler Job Information - Lenovo RackSwitch G8264 Command Reference Manual

Scheduler Job Information

© Copyright Lenovo 2017
The following command displays detailed information of all current scheduled
jobs:
show scheduler job
Command mode: All
Job name: "auto_image_upgrade"
time event: absolute start time: 2013/11/20 14:30:0,
interval: 43200 seconds
action: "auto_image_upgrade.py" "10.20.8.8 group1"
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
Job name: "auto_image_upgrade"
State: idle
Previous process id: 0
Next execution time: 14:30:04 Thu Nov 21, 2013
Previous execution time: 02:30:00 Thu Nov 21, 2013
Previous user msec: 255
Previous sys msec: 16
Previous cpu usage: 7.59 (%)
Execution count:1
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
Job name: "monitor"
syslog event: LINKUP
action: "exe_ping.py"
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
Job name: "monitor"
State: idle
Previous process id: 0
Next execution time: NA
Previous execution time: Yet to be executed or completed
Previous user msec: 0
Previous sys msec: 0
Previous cpu usage: 0.0 (%)
Execution count:0
The following table describes the Scheduler Job information.
Table 87.
Scheduler Job Information Fields
Parameter Description
Job name The name of the displayed scheduler job
State Current scheduler job state (Idle/Running/Matched)
Matched state The event was raised but a different job is already running, thus
the event is put into the event queue.
Previous The internal process ID of the thread that previously run the job
process id
Next execution The timestamp when the job is scheduled to run
time
Chapter 2: Information Commands
209