Stacking Maintenance - Lenovo RackSwitch G8264 Command Reference Manual

Stacking Maintenance

© Copyright Lenovo 2017
The following table describes Stacking maintenance commands.
Table 418.
Stacking Maintenance Options
Command Syntax and Usage
show logging swn <configured switch number (1‐8)> [messages]
[severity <0‐7>] [reverse] [|{include|exclude|section|
|begin|head <1‐2000>|last <1‐2000>}]
Displays the current syslog settings for the specified configured switch,
followed by the most recent 2000 syslog messages.
messages displays the most recent 2000 syslog messages only

severity displays syslog messages of the specified severity level

reverse displays syslog messages starting with the most recent message

| displays syslog messages that match one of the following filters:

• include displays syslog messages that match the specified expression
• exclude displays syslog messages that don't match the specified
expression
• section displays syslog messages that match the specified section
• begin displays syslog messages beginning from the first message that
matches the specified expression
• head displays the oldest syslog messages for the specified value
• last displays the most recent syslog messages for the specified value
Note: This command is available only on the master switch.
Command mode: All
copy log swn <configured switch number (1‐8)> sftp
Saves the system log file from the specified configured switch via SFTP.
Note: This command is available only on the master switch.
Command mode: All
copy log swn <configured switch number (1‐8)> tftp [address
<hostname or server IP address>] [filename <server‐filename>]
[data­port|mgt­port]
Saves the system log file from the specified configured switch via TFTP.
Note: This command is available only on the master switch.
Command mode: All
clear logging [master|backup|<attached switch number (1‐16)>|all]
Clears the system log file (SYSLOG) on the current switch. You can clear the
syslog from the master switch, the backup switch or any attached switch. The
all option will clear the system log files from all the switches in the stack.
Note: The optional command elements are available only on the master
switch.
Command mode: Privileged EXEC
Chapter 7: Maintenance Commands
741