© Copyright Lenovo 2017
Table 363.
VM Group Configuration Options (continued)
Command Syntax and Usage
[no] virt vmgroup <1‐4096> vmap <1‐128> [serverports|
|nonserverports]
Adds or removes the selected VLAN Map to/from this group. You can choose
to limit operation of the VLAN Map to server ports only or non‐server ports
only. If you do not select a port type, the VMAP is applied to the entire VM
Group.
For more information about configuring VLAN Maps, see "VMAP
Configuration" on page
Command mode: Global configuration
[no] virt vmgroup <1‐4096> vport <1‐8>
Adds or removes the selected virtual port to the VM group.
Command mode: Global configuration
no virt vmgroup <1‐4096>
Deletes the VM group.
Command mode: Global configuration
show virt vmgroup <1‐4096>
Displays the current VM group parameters.
Command mode: All
448.
Chapter 4: Configuration Commands
641