Failover Manual Monitor Control Configuration - Lenovo RackSwitch G8264 Command Reference Manual

Failover Manual Monitor Control Configuration

496
G8264 Command Reference for ENOS 8.4
Use these commands to define the port link(s) to control. The Manual Monitor
Control configuration accepts any non‐management port.
Table 252.
Failover Manual Monitor Control Options
Command Syntax and Usage
[no] failover trigger <1‐8> mmon control adminkey <1‐65535>
Adds or removes an LACP admin key to the Manual Monitor Control
configuration. LACP Link Aggregation Groups (LAGs) formed with this
admin key will be included in the Manual Monitor Control configuration.
Command mode: Global configuration
[no] failover trigger <1‐8> mmon control member
<port alias or number>
Adds or removes the selected port to the Manual Monitor Control
configuration.
Command mode: Global configuration
[no] failover trigger <1‐8> mmon control portchannel <1‐64>
Adds or removes the selected LAG to the Manual Monitor Control
configuration.
Command mode: Global configuration
[no] failover trigger <1‐8> mmon control vmember
<virtual port number>
Adds or removes the specified virtual port to the Manual Monitor Control
configuration.
Command mode: Global configuration
show failover trigger <1‐8>
Displays the current Failover settings.
Command mode: All