Ikev2 Information Dump - Lenovo RackSwitch G8264 Command Reference Manual

IKEv2 Information Dump

© Copyright Lenovo 2017
The following command displays IKEv2 information:
show ikev2
Command mode: All
IKEv2 retransmit time: 20
IKEv2 cookie notification: disable
IKEv2 authentication method: Pre­shared key
IKEv2 proposal:
Cipher: 3des
Authentication: sha1
DH Group: dh­2
Local preshare key: ibm123
IKEv2 choose IPv6 address as ID type
No SAD entries.
IKEv2 information includes:
 IKEv2 retransmit time, in seconds.
 Whether IKEv2 cookie notification is enabled.
 The IKEv2 proposal in force. This includes the encryption algorithm (cipher),
the authentication algorithm type and the Diffie‐Hellman (DH) group, which
determines the strength of the key used in the key exchange process. Higher DH
group numbers are more secure but require additional time to compute the key.
 The local preshare key.
 Whether IKEv2 is using IPv4 or IPv6 addresses as the ID type.
 Security Association Database (SAD) entries, if applicable.
Chapter 2: Information Commands
135