Private VLAN Configuration
504
G8264 Command Reference for ENOS 8.4
Use the following commands to configure Private VLANs.
Table 259.
Private VLAN Options
Command Syntax and Usage
privatevlan association [add|remove] <secondary VLAN list>
Configures Private VLAN mapping between a primary VLAN and secondary
VLANs. If no optional parameter is specified, the list of secondary VLANs,
replaces the currently associated secondary VLANs. Otherwise:
add appends the secondary VLANs to the ones currently associated
remove excludes the secondary VLANs from the ones currently associated
Command mode: VLAN
[no] privatevlan community
Enables or disables the VLAN type as a community VLAN.
Community VLANs carry upstream traffic from host ports. A Private VLAN
may have multiple community VLANs.
Command mode: VLAN
[no] privatevlan isolated
Enables or disables the VLAN type as an isolated VLAN.
The isolated VLAN carries unidirectional traffic from host ports. A Private
VLAN may have only one isolated VLAN.
Command mode: VLAN
[no] privatevlan primary
Enables or disables the VLAN type as a Primary VLAN.
A Private VLAN must have only one primary VLAN. The primary VLAN
carries unidirectional traffic to ports on the isolated VLAN or to community
VLAN.
Command mode: VLAN
show vlan privatevlan [type]
Displays current parameters for the selected Private VLAN(s).
type lists only the VLAN type for each private VLAN: community, isolated,
or primary
Command mode: All