Acl Log Configuration - Lenovo RackSwitch G8264 Command Reference Manual

ACL Log Configuration

442
G8264 Command Reference for ENOS 8.4
These commands allow you to define filtering criteria for each IPv6 Access Control
List (ACL) log.
Table 214.
ACL Log Configuration Options
Command Syntax and Usage
[no] access­control list <1‐256> log
Enables or disables Access Control List logging.
Command mode: Global configuration
[no] access­control list6 <1‐128> log
Enables or disables IPv6 Access Control List logging.
Command mode: Global configuration
access­control log interval <5‐600>
Sets the filter log displaying interval in seconds.
The default setting is 300 seconds.
Command mode: Global configuration
access­control log rate­limit <1‐1000>
Sets the filter log queue rate limit in packets per second (pps).
The default settings is 10 pps.
Command mode: Global configuration
default access­control log [interval|rate­limit]
Resets the specified filter log parameters to their default values.
Command mode: Global configuration
show access­control log
Displays the current ACL log parameters.
Command mode: All