Link Aggregation Group (LAG) Information
84
G8264 Command Reference for ENOS 8.4
The following command displays Link Aggregation Group (LAG) information:
show portchannel information
Command mode: All
Trunk group 1: Enabled
Protocol Static
Port state:
1: STG 1 forwarding
2: STG 1 forwarding
When LAGs are configured, you can view the state of each port in the various
LAGs.
Note: If Spanning Tree Protocol on any port in the LAG is set to forwarding, the
remaining ports in the LAG will also be set to forwarding.