Lenovo RackSwitch G8264 Command Reference Manual page 339

© Copyright Lenovo 2017
Table 147.
General Configuration Commands
Command Syntax and Usage
dir [configs|images]
Displays the configuration files and NOS images currently on the switch.
configs ‐ displays only the configuration files currently on the switch

images ‐ displays only the system images currently on the switch

For more details, see page
Command mode: Privileged EXEC
mv <source filename> <destination filename>
Copies a configuration files or a system image from the specified location to
another specified location.
Note: This command is applicable only to configuration files or NOS images.
Command mode: Privileged EXEC
write [memory]
Copy the current (running) configuration from switch memory to the
active­config partition.
Command mode: Privileged EXEC
show running­config
Dumps current configuration to a script file. For details, see page
Command mode: Privileged EXEC
show running­config diff
Displays running configuration changes that have been applied but not saved
to flash memory.
Command mode: Privileged EXEC
34.
Chapter 4: Configuration Commands
675.
339