Lenovo RackSwitch G8264 Command Reference Manual page 510

510
G8264 Command Reference for ENOS 8.4
Table 262.
IP Interface Configuration Options (continued)
Command Syntax and Usage
vlan <VLAN ID (1‐4094)>
Configures the VLAN number for this interface. Each interface can belong to
one VLAN.
IPv4: Each VLAN can contain multiple IPv4 interfaces.
IPv6: Each VLAN can contain only one IPv6 interface.
Note: Assigning VLANs only applies to in‐band management IP interfaces 1
and 2. Default is VLAN 1 if not configured.
Command mode: Interface IP
no interface ip <1‐128>
Removes this IP interface.
Command mode: Global configuration
show ip tenant [<1‐30>]
Displays tenant information.
Command mode: All
show ip tenant info [<1‐30>]
Displays tenant dynamic ACLs, including next‐hops.
Command mode: All
show interface ip [<1‐128>]
Displays the current interface settings.
Command mode: All