Lenovo RackSwitch G8264 Command Reference Manual page 177

© Copyright Lenovo 2017
The following command displays information for a specific VM host:
show virt vmware showhost {<host UUID>|<host IP address>|<host name>}
Command mode: All
Vswitches available on the host:
vSwitch0
vSwitch1
Host physical nics:
Device vSwitch MAC Address
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
vmnic0 None 5c:f3:fc:49:f0:e4
vmnic1 vSwitch0 5c:f3:fc:49:f0:e6
vmnic2 None 00:00:c9:da:f5:d8
vmnic3 vSwitch1 00:00:c9:da:f5:dc
vusb0 None 5e:f3:fc:4f:f0:e7
Port Groups and their vSwitches on the host:
Lenovo_test vSwitch0
VM Network vSwitch0
Management Network vSwitch0
Lenovo_Default vSwitch1
Lenovo_test30 vSwitch1
Lenovo_test40 vSwitch1
VM Network 2 vSwitch1
Lenovo_test50 vSwitch1
Lenovo_unu vSwitch1
Detailed information about host and VM interfaces on this hypervisor:
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­
MAC Address 5c:f3:fc:49:f0:e6
Port N/A
Type VM Kernel
IP Address 10.241.32.131
Host Name 10.241.32.131
Host UUID cab9df06­8fd7­3ecf­a4ba­f373ed60ad9d
vSwitch vSwitch0
Port Group Management Network
VLAN ID 0
...
Chapter 2: Information Commands
177