© Copyright Lenovo 2017
Table 153.
RADIUS Server Configuration Options (continued)
Command Syntax and Usage
radiusserver secondaryhost {<hostname>|<IP address>} key
<1‐32 characters>
Sets the secondary RADIUS server address and the shared secret between the
switch and the RADIUS server(s).
Command mode: Global configuration
radiusserver secondaryhost {dataport|mgtport}
Defines the secondary interface port to use to send RADIUS server requests.
Select the port to use for data transfer.
Command mode: Global configuration
[no] radiusserver secondaryhost [key]
Deletes the secondary RADIUS server. The key option only deletes the shared
secret between the switch and the RADIUS server.
Command mode: Global configuration
[no] radiusserver securebackdoor
Enables or disables the RADIUS back door using secure password for
telnet/SSH/HTTP/HTTPS. This command does not apply when backdoor is
enabled.
Command mode: Global configuration
radiusserver timeout <1‐10>
Sets the amount of time, in seconds, before a RADIUS server authentication
attempt is considered to have failed.
The default is 3 seconds.
Command mode: Global configuration
ip radius sourceinterface loopback <1‐5>
Sets the RADIUS source loopback interface.
Command mode: Global configuration
no ip radius sourceinterface loopback
Removes all RADIUS source loopback interfaces.
Command mode: Global configuration
show radiusserver
Displays the current RADIUS server parameters.
Command mode: All
Chapter 4: Configuration Commands
357