Port Error Disable And Recovery Configuration; Port Link Flap Dampening Configuration - Lenovo RackSwitch G8264 Command Reference Manual

Port Error Disable and Recovery Configuration

Port Link Flap Dampening Configuration

406
G8264 Command Reference for ENOS 8.4
The Error Disable and Recovery feature allows the switch to automatically disable
a port if an error condition is detected on the port. The port remains in the
error‐disabled state until it is re‐enabled manually, or re‐enabled automatically by
the switch after a timeout period has elapsed. The error‐disabled state of a port
does not persist across a system reboot.
Table 180.
Port Error Disable Options
Command Syntax and Usage
[no] errdisable recovery
Enables or disables automatic error‐recovery for the port. The default setting is
enabled.
Note: Error‐recovery must be enabled globally before port‐level commands
become active.
Command mode: Interface port/Interface portchannel
show interface port <port alias or number> errdisable
Displays the specified port's Error Disable parameters.
Command mode: All
The following table describes the Port Link Flap Dampening commands.
Table 181.
Port Link Flap Dampening Configuration Options
Command Syntax and Usage
[no] errdisable link­flap enable
Enables or disables Link Flap Dampening on the port. For more information,
see "Link Flap Dampening Configuration" on page
Command mode: Interface port
show interface port <port alias or number> errdisable link­flap
Displays the current Link Flap Dampening parameters for the specified port.
Command mode: All
348.