Dcbx Feature Information - Lenovo RackSwitch G8264 Command Reference Manual

DCBX Feature Information

DCBX Port Feature State­machine Info
==================================================================================
Alias Port Type AdmState Will Advrt OpVer MxVer PrWill SeqNo Err OperMode Syncd
­­­­­ ­­­­ ­­­­­­­ ­­­­­­­­ ­­­­ ­­­­­ ­­­­­ ­­­­­ ­­­­­­ ­­­­­ ­­­ ­­­­­­­­ ­­­­­
1 1 ETS enabled No Yes 0 0 No 1 No disabled No
1 1 PFC enabled No Yes 0 0 No 1 No disabled No
1 1 AppProt disabled No Yes 0 0 No 1 No disabled No
2 2 ETS enabled No Yes 0 0 No 1 No disabled No
2 2 PFC enabled No Yes 0 0 No 1 No disabled No
2 2 AppProt disabled No Yes 0 0 No 1 No disabled No
3 3 ETS enabled No Yes 0 0 No 1 No disabled No
3 3 PFC enabled No Yes 0 0 No 1 No disabled No
3 3 AppProt disabled No Yes 0 0 No 1 No disabled No
4 4 ETS enabled No Yes 0 0 No 1 No disabled No
4 4 PFC enabled No Yes 0 0 No 1 No disabled No
4 4 AppProt disabled No Yes 0 0 No 1 No disabled No
5 5 ETS enabled No Yes 0 0 No 1 No disabled No
5 5 PFC enabled No Yes 0 0 No 1 No disabled No
5 5 AppProt disabled No Yes 0 0 No 1 No disabled No
...
© Copyright Lenovo 2017
The following command displays DCBX Feature information:
show cee information dcbx port <port alias or number> feature
Command mode: All
The following table describes the DCBX Feature information.
Table 80.
DCBX Feature Information Fields
Parameter Description
Alias Displays each port's alias.
Port Displays each port's number.
Type Feature type
AdmState Feature status (Enabled or Disabled)
Will Willing flag status (Yes/True or No/Untrue)
Advrt Advertisement flag status (Yes/True or No/Untrue)
OpVer Operating version negotiated with the peer device
MxVer Maximum operating version supported by the system
PrWill Peer's Willing flag status (Yes/True or No/Untrue)
SeqNo Sequence number that changes each time a DCBX parameter in
one or more DCB feature TLVs changes
Err Error condition flag (Yes or No). Yes indicates that an error
occurred during the exchange of configuration data with the
peer.
Chapter 2: Information Commands
197