IP Security Information
136
G8264 Command Reference for ENOS 8.4
The following table describes the commands used to display information about IP
security.
Table 58.
IPsec Information Commands
Command Syntax and Usage
show ipsec dynamicpolicy [<1‐10>]
Displays dynamic policy information.
Command mode: All
show ipsec manualpolicy [<1‐10>]
Displays manual policy information. See page
Command mode: All
show ipsec sa
Displays all security association information.
Command mode: All
show ipsec spd
Displays all security policy information.
Command mode: All
show ipsec trafficselector [<1‐10>]
Displays IPsec traffic selector information.
Command mode: All
show ipsec transformset [<1‐10>]
Displays IPsec transform set information.
Command mode: All
137 for sample output.