SNMPv3 Notify Table Configuration
© Copyright Lenovo 2017
Table 165.
Target Parameters Table Configuration Options (continued)
Command Syntax and Usage
snmpserver targetparameters <1‐16> security {usm|snmpv1|
|snmpv2}
Allows you to select the security model to be used when generating the SNMP
messages.
Command mode: Global configuration
snmpserver targetparameters <1‐16> username <1‐32 characters>
Defines the name that identifies the user in the USM table (page
behalf the SNMP messages are generated using this entry.
Command mode: Global configuration
no snmpserver targetparameters <1‐16>
Deletes the targetParamsTable entry.
Command mode: Global configuration
show snmpserver v3 targetparameters <1‐16>
Displays the current targetParamsTable configuration.
Command mode: All
SNMPv3 uses Notification Originator to send out traps. A notification typically
monitors a system for particular events or conditions and generates
Notification‐Class messages based on these events or conditions.
Table 166.
Notify Table Options
Command Syntax and Usage
snmpserver notify <1‐16> name <1‐32 characters>
Defines a locally arbitrary, but unique, identifier associated with this SNMP
notify entry.
Command mode: Global configuration
snmpserver notify <1‐16> tag <1‐255 characters>
Allows you to configure a tag that contains a tag value which is used to select
entries in the Target Address Table. Any entry in the
snmpTargetAddrTable, that matches the value of this tag, is selected.
Command mode: Global configuration
no snmpserver notify <1‐16>
Deletes the notify table entry.
Command mode: Global configuration
show snmpserver v3 notify <1‐16>
Displays the current notify table configuration.
Command mode: All
378) on whose
Chapter 4: Configuration Commands
385