Lenovo RackSwitch G8264 Command Reference Manual page 324

324
G8264 Command Reference for ENOS 8.4
Table 140.
QoS Statistics Commands
Command Syntax and Usage
show qos protocol­packet­control protocol­counters
[<packet type>]
Displays the total packet count of the selected packet type received by
hardware. The following packet types are allowed:
802.1x (IEEE 802.1x packets)

application­cri­packets (critical packets of various applications)

arp­bcast (ARP broadcast packets)

arp­ucast (ARP unicast reply packets)

bgp (BGP packets)

bpdu (Spanning Tree Protocol packets)

cisco­bpdu (Cisco STP packets)

dest­unknown (packets with destination not yet learned)

dhcp (DHCP packets)

ecp (ECP packets)

fips (FIPS packets)

icmp (ICMP packets)

icmp6 (ICMP6 packets)

igmp (IGMP packets)

ipv4­miscellaneous (IPv4 packets with IP options and TTL exception)

ipv6­nd (IPv6 Neighbor Discovery packets)

lacp (LACP packets)

lldp (LLDP packets)

oflow­cntrler (packets that hit the OpenFlow send‐to‐controller filter)

oflow­default (packets that hit the OpenFlow default filter)

oflow­mgmt (packets that hit the OpenFlow management filter)

ospf (OSPF packets)

ospf3 (OSPF3 Packets)

pim (PIM packets)

ptp (PTP packets)

rip (RIP packets)

system (system protocols, such as tftp, ftp, telnet or ssh)

udld (UDLD packets)

vlag (VLAG packets)

vrrp (VRRP packets)

Command mode: All