Log_Err - Lenovo RackSwitch G8264 Command Reference Manual

LOG_ERR

© Copyright Lenovo 2017
Thread LOG_ERR Message
CFG Canʹt assign a port with same protocol to different VLANs.
CFG Configuration file is EMPTY
CFG Configuration is too large
CFG Default VLAN and management VLAN cannot be
private‐VLANs.
CFG Error writing active config to FLASH! Configuration is too large
CFG Error writing active config to FLASH! Unknown error
CFG ERROR: Cannot enable/disable RMON for Mgmt Port <port>
CFG ERROR: More than <maximum> VLAN(s) in downstream
CFG Error writing active config to FLASH! Another save is in progress
CFG Maximum allowed number (30) of Alarm groups have already
been created.
CFG Maximum allowed number (30) of Event groups have already
been created.
CFG Maximum allowed number (5) of History groups have already
been created.
CFG Need to enable portʹs tag for tagging pvlan.
CFG Overflow! Port has more than 16 protocols.
CFG Port is not for this protocol.
CFG Switch rem port fails when disable {protocol|vlan}.
CFG TFTP {Copy|cfgRcv} attempting to redirect a previously
redirected output
CFG WARN: Have not defined protocol type for VLAN <VLAN>
Protocol <protocol>!
DCBX Duplicate DCBX Application Protocol Sub‐TLV detected on port
<port>
DCBX Duplicate DCBX Control Sub‐TLV detected on port <port>
DCBX Duplicate DCBX PFC Sub‐TLV detected on port <port>
DCBX Duplicate DCBX PG Sub‐TLV detected on port <port>
DCBX Duplicate DCBX VNIC Sub‐TLV detected on port <port>
ETS The internal COS7 is used for stack communication; hence the ETS
priority group 7 is not available.
Appendix A: Enterprise NOS System Log Messages
751