Lenovo RackSwitch G8264 Command Reference Manual page 755

© Copyright Lenovo 2017
Thread LOG_INFO Message (continued)
MGMT FLASH ERROR ‐ invalid address used
MGMT Flash Read Error. Failed to read flash into holding structure.
Quitting
MGMT Flash Write Error
MGMT Flash Write Error. Failed to allocate buffer. Quitting
MGMT Flash Write Error. Trying again
MGMT image1|2 download completed. Now writing to flash.
MGMT image1|2 downloaded {from host <hostname>|via browser},
filename too long to be displayed, software version <version>
MGMT image1|2 downloaded from host <hostname>, file ʹ<filename>ʹ,
software version <version>
MGMT image1|2 Firmware uploaded.
MGMT Incorrect image being loaded
MGMT Invalid diff track address. Continuing with apply()
MGMT Invalid image being loaded for this switch type
MGMT invalid image download completed. Now writing to flash.
MGMT invalid image downloaded {from host <hostname>|via browser},
filename too long to be displayed, software version <version>
MGMT invalid image downloaded from host <hostname>, file ʹ<filename>ʹ,
software version <version>
MGMT invalid image Firmware uploaded.
MGMT NETBOOT: Config successfully downloaded and applied from
<hostname>:<filename>
MGMT New config set
MGMT new configuration applied [from BBI|EM|NETBOOT|SCP|
SNMP|Stacking Master]
MGMT new configuration saved from {BBI|BladeOS|ISCLI|SNMP}
MGMT Revert failed: configuration is dumped or modified by another
user.
MGMT scp<username>(<user type>) {logout|ejected|idle timeout|
connection closed} from {Console|Telnet/SSH}
MGMT scp<username>(<user type>) login {on Console|from host
<IP address>}
MGMT SP boot kernel download completed. Now writing to flash.
Appendix A: Enterprise NOS System Log Messages
755