ECC800 Data Center Controller
User Manual
----End
5.11.3 Commissioning IPC6321 Cameras
Prerequisites
For details about how to commission IP cameras and set parameters for them, see the
document delivered or click
If multiple cameras are accessed, retain the connection of one camera and disconnect
connections from other cameras. After commissioning the connected camera, commission
other cameras in the same way.
Procedure
Step 1 Log in to the camera WebUI.
1.
2.
Issue 06 (2020-01-02)
Figure 5-23 Setting secondary stream 1 parameters
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter button.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
Copyright © Huawei Technologies Co., Ltd.
here
to download the document.
5 Power-On Commissioning
141