Commissioning A Temperature Sensor; Commissioning A T/H Sensor - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

5.9.4 Commissioning a Temperature Sensor

If a temperature sensor is installed, perform the following steps to configure it.
Procedure
Step 1 Set temperature sensor parameters.


Step 2 Check the monitoring functions of temperature sensor.
Table 5-27 Commissioning the sensor
Check Method
View the operating information about
the temperature sensor on the WebUI.
----End

5.9.5 Commissioning a T/H Sensor

If a T/H sensor is installed, perform the following steps to configure it.
Procedure
Step 1 Check functions of the T/H sensor.
Table 5-28 Function commissioning
Check Method
Check the running information
about the T/H sensor on the
WebUI.
Set T/H sensor alarm thresholds.
Issue 06 (2020-01-02)
 If the sensor is prefabricated, only check its settings.
 The actual value prevails. Only the method of the parameter settings is described.
Scenario 1: Connect the temperature sensor to the AI/DI port on the ECC800 (AI/DI_2 is
used as an example).
On the WebUI, choose Monitoring > System > ECC800 > Running Parameters >
AI/DI_2 Port Settings, set AI/DI_2 sensor to Enable, and click Submit. Set AI/DI_2
sensor name to Temperature sensor, check that AI/DI_2 sensor type is set to NTC,
and click Submit.
Scenario 2: Connect the temperature sensor to the NTC port on the rack environment
unit.
The temperature sensor supports self-discovery and does not need to set parameters.
Copyright © Huawei Technologies Co., Ltd.
Normal Connection Status
You can view the current cabinet temperature.
Normal Connection Status
Choose Monitoring > Aisle > T/H Sensor Group >
T/H Sensor n > Running Info, and check the current
T/H information of the cabinet.
Choose Monitoring > Aisle > T/H Sensor Group >
T/H Sensor n > Running Parameters, and set High
temperature alarm threshold, Low temperature
5 Power-On Commissioning
128