Huawei ECC800 User Manual page 93

ECC800 Data Center Controller
User Manual
Restoring factory settings will restore parameters to their default values. Perform this
operation with caution.
The following parameters will be reset to their default values:









Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Maintenance > Configuration File and click Restore Factory Settings.
The ECC800 will restart after you restore factory settings.
Step 3 Enter the password currently used for logging in to the WebUI and click Submit.
----End
Issue 06 (2020-01-02)
Parameters in Plan View under Home will be cleared.
Parameters in System, Power Distribution, Aisle, Air Conditioner, and IT Cabinet
under Monitoring will be restored to default values. For example, on the
AI/DI_1–AI/DI_6 setting tab page (displayed after you choose System > ECC800 >
Running Parameters), AI/DI_1 sensor-AI/DI_6 sensor will be restored to Disable. On
the site device number tab page, Site device num will be restored to 0. On the online
detection timeout interval tab page, Online detection timeout interval will be restored
to 30
Parameters in Alarm Parameters and Alarm Linkage under System Settings will be
restored to default values.
Parameters in SNMP Settings under System Settings will be restored to default values
(SNMP version: SNMPv3; SNMP port: 161).
Communication Parameters in NetEco under System Settings will be restored to
default values (server IP: 192.168.0.10; port number: 31220; link to the monitoring IP
address: WAN_1).
Micro-Module Name in Micro-Module Settings under System Settings will be
restored to ECC800 and System Type to FusionModule2000.
Parameters in Video Settings under System Settings will be restored to default values.
Parameters in PLC under System Settings will be restored to default values.
PUE function and PUE configuration mode in PUE Configuration under System
Settings will be restored to Enable and Standard respectively.
Copyright © Huawei Technologies Co., Ltd.
4 UI Description
84