Faq; Webui Operations; How To Install A Network Security Certificate - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

9.1 WebUI Operations

Prerequisites



9.1.1 How to Install a Network Security Certificate?

Context



Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Upload a network security certificate.
1.
2.
3.
4.
5.
6.
7.
8.
Issue 06 (2020-01-02)
You have obtained the IP address of the ECC800 as well as the user name and password
used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800 is prepared,
and the PC has connected to port WAN_1 on the ECC800.
You have copied a network security certificate and its key you obtained to the PC.
Install a network security certificate if a security certificate problem message is
displayed when you attempt to log in to the ECC800 WebUI.
You need to apply to an organization authorized by the customer for a network security
certificate and its key with the ECC800 IP address or domain name. This section
describes how to import the certificate and key.
Choose System Settings > Micro-Module Settings.
Select a certificate format from the drop-down list box.
Click Browse on the right of Select a network security certificate.
Select the network security certificate to be imported from the PC and click Upload.
Click Browse on the right of Select a network security certificate key.
Select the network security certificate key to be imported from the PC and click Upload.
(Optional) If the network security certificate is encrypted, select If an encrypted private
key is imported, enter the password for decryption., and specify Key cryptography
and Confirm key cryptography.
Click Submit in the Network Security Certificate area.
Copyright © Huawei Technologies Co., Ltd.

9 FAQ

9
FAQ
184