Intelligent Battery Monitoring System - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Table 3-53 Structural specifications of an alarm beacon
Item
Dimensions (L x W x H)
Installation requirements
Protection level
Environmental
requirements
MTBF
Table 3-54
Table 3-54 Technical specifications of an alarm beacon
Item
Power input
Sound pressure
Continuous operating
time

3.3.19 Intelligent Battery Monitoring System

The intelligent battery monitoring system consists of the CIM (CIM01C2) and BIM
(BIM01C3).
The communication interface module (CIM) is an intelligent battery management module that
collects wireless communication data from the downstream battery interface module (BIM)
groups, collects and analyzes the operating data of battery strings, calculates state of charge
(SOC) and state of health (SOH) of batteries and battery strings and estimates the battery
health status accordingly, supports battery tripping management, and uploads data to the
management unit through COM or PoE ports.
The BIM is a battery monitoring module that monitors the voltages, internal resistances, and
pole temperatures of batteries.
In the scenario with battery cabinets, the CIM is installed inside a smart module battery
cabinet and the CIM communications cable connects to a smart ETH gateway.
shows the CIM and BIM networking in the scenario with battery cabinets.
Issue 06 (2020-01-02)
lists the technical specifications of an alarm beacon.
 One CIM can manage BIMs of a maximum of four battery strings.

The BIM01C3 supports Shoto and Enersys batteries.
Copyright © Huawei Technologies Co., Ltd.
Specifications
130 mm x 75 mm x 55 mm
Installed on a wall
IP50
RoHS, Reach
≥ 100,000 hours
Specifications
RJ45 port, input voltage 9–16 V DC, operating current ≤ 400
mA
≥ 100 ± 3 dB/30 cm
≥ 45 min
3 Device Description
Figure 3-31
62