Handling Controller High Voltage Circuit - Komatsu PC200-8M0 Shop Manual

SEN06127-00
Handling controller high voltage
circuit
1. Disconnection or connection of the connector
between the engine controller and engine must
be done after turning off the starting switch.
2. It is prohibited to start the engine when T-
adapter is inserted or connected, for trouble-
shooting purpose, to the connector between
the engine controller and engine.
a You may turn the starting switch to the
OFF or ON position but must not turn it to
the START position.
28
30-101

Handling controller high voltage circuit

1
101 Testing and adjusting, Part 1
PC200, 200LC, 220, 220LC-8M0