Handling Of Intake System Parts - Komatsu PC200-8M0 Shop Manual

SEN06112-00

Handling of intake system parts

q The Komatsu Variable Geometry Turbocharger
(KVGT) consists of more precise parts (vari-
able mechanism) than the parts used in the
conventional turbocharger. If foreign material
enters this system, it may cause a failure. Use
special care to prevent entry of the foreign
material when servicing the air intake system.
Be careful of working environment
q Avoid the repair work of the machine in rain or
strong wind or at the places where there is a lot
of dust.
Sealing openings
Plug the pipes and the openings of the compo-
q
nents which are removed, with the caps, tapes,
vinyl bags, etc. to prevent foreign material from
entering. Never perform repair works under the
condition that the openings are left open or
plugged with rag since foreign material may
enter.
14
00-200
200 Foreword and general information

Handling of intake system parts

PC200, 200LC, 220, 220LC-8M0
1