Komatsu PC200-8M0 Shop Manual page 458

SEN06128-00
2. Selecting sub menu
After the "Default" screen is displayed, select
"Key-on Mode" by using the function switches
or numeral input switches.
a Select this sub menu as in the case of
selecting a menu on the "Service Menu"
screen.
3. Selecting mode
After the "Key-on Mode" screen is displayed,
select the mode to be set by using the function
switches.
q Power mode: [P] is displayed when the
starting switch is set to the ON position
Economy mode: [E] is displayed when the
q
starting switch is set to the ON position.
q Lifting mode: [L] is displayed when the
starting switch is set to the ON position.
q Breaker mode: [B] is displayed when the
starting switch is set to the ON position.
q Attachment mode/P-mode: [ATT/P] is dis-
played when the starting switch is set to
the ON position.
q Attachment mode/E-mode: [ATT/E] is dis-
played when the starting switch is set to
the ON position.
q Mode at previous key-off:
selected the last time is displayed when
the starting switch is set to the ON posi-
tion.
q [F3]: Moves to lower item
[F4]: Moves to upper item
q
q [F5]: Cancels the selection and returns
the display to the default screen
q [F6]: Validates the selection and returns
the display to the default screen
a Factory default is "Mode at Previous Key-
off".
a If "With Attachment" is not selected, selec-
tion of the Attachment /P-Mode and
Attachment/E-mode is disabled.
a If you change the setting to "Without
attachment" when Attachment/P-mode
[ATT/P] or Attachment/E-mode [ATT/E] is
38
30-102
a If the engine is stopped with the working
Default (Unit)
Use the menu of "Default" to check or change vari-
ous settings of the machine monitor and machine.
Use the sub menu of "Unit" to select the unit of the
data displayed for monitoring, etc.
1. Selecting the menu
Select "Default" on the "Service Menu" screen.
The mode
102 Testing and adjusting, Part 2
Special functions of machine monitor
selected, turning on the starting switch
displays Power mode [P] when [ATT/P] is
selected and displays economy mode [E]
when [ATT/E] is selected.
mode set to breaker mode [B] in the oper-
ator mode, Breaker Mode [B] is always
displayed when the starting switch is
turned to ON position, regardless of the
above setting.
PC200, 200LC, 220, 220LC-8M0