Komatsu PC200-8M0 Shop Manual page 429

102 Testing and adjusting, Part 2
Special functions of machine monitor
Display of standard screen
If the machine monitor starts normally, the standard
screen is displayed.
a Service meter (a) or clock is displayed in the
top center area of the screen (use [F4] to
switch the display of the service meter and
clock).
a Right end of the screen displays ECO gauge
(b) (turn on or off the display in the operator
mode).
Display of end screen
When starting switch is turned to OFF position, the
end screen is displayed for 5 seconds.
a Another message may be displayed on the
end screen due to the message display func-
tion of KOMTRAX.
Selection of auto-deceleration
While the ordinary screen is displayed, if the auto-
deceleration switch is pressed, large auto-deceler-
ation monitor (a) is displayed for 2 seconds and the
setting of the auto-deceleration is changed.
a Each time the auto-deceleration switch is
pressed, the auto-deceleration is changed in
the order of [ON] o [OFF] o [ON].
a If the auto-deceleration is set to ON, large
monitor (a) and auto-deceleration monitor (b)
are displayed simultaneously.
PC200, 200LC, 220, 220LC-8M0
a If the auto-deceleration is set to OFF, auto-
deceleration monitor (b) goes off.
Selection of working mode
Select desired working mode according to the fol-
lowing procedure.
1. While the standard screen is displayed, press
the working mode selector switch, and the
working mode selection screen is displayed.
a Following figure shows the working mode
selection screen when "with attachment" is
set. (If "with attachment" is not set in ser-
vice mode, attachment mode "ATT/P",
"ATT/E" are not displayed.)
2. Operate the function switches or working mode
selector switch to select the desired working
mode and enter the selection.
Function switch
q [F3]: Moves to lower item
[F4]: Moves to upper item
q
q [F5]: Cancels selection and returns to
standard screen
[F6]: Enters selection and returns to stan-
q
dard screen
Working mode selector switch
q Pressed : Moves to lower item
q Kept pressed : Enters selection and
returns to standard screen
SEN06128-00
9
30-102