Komatsu PC200-8M0 Shop Manual page 427

102 Testing and adjusting, Part 2
Special functions of machine monitor
Display of KOMATSU logo
When starting switch is turned to ON position,
KOMATSU logo is displayed for 2 seconds.
a After the KOMATSU logo screen is displayed
for 2 seconds, the screen changes to "Pass-
word input" screen, or "Check before starting"
screen.
Display of inputting password
After the KOMATSU logo screen is displayed, the
screen to input the engine start lock password is
displayed.
a This screen is displayed only when the engine
start lock function is enabled.
a If correct password is input, the screen
changes to "Check before starting" screen.
a The machine monitor has some password pro-
tect functions other than the engine start lock.
Those functions are independent from one
another.
a The following screen may be displayed instead
of the above "Password input" screen.
a If this screen is displayed, call the person
responsible for the operation of KOMTRAX in
your Komatsu distributor and ask for remedy.
PC200, 200LC, 220, 220LC-8M0
Display of check of breaker mode
When the starting switch is turned ON, if the work-
ing mode is set to the breaker mode [B], a message
to inform the operator of starting in the breaker
mode is displayed on the screen.
k
If an attachment other than the breaker is
used while the working mode is set to the
breaker mode [B], the machine may move
unexpectedly or may not operate normally
or the hydraulic components may be dam-
aged.
a After operation to check of the breaker mode is
finished, the screen changes to "Display of
check before starting".
If [No] is selected: Working mode is set to
economy mode [E]
If [Yes] is selected: Working mode is set to
breaker mode [B]
SEN06128-00
7
30-102