Komatsu PC200-8M0 Shop Manual page 459

102 Testing and adjusting, Part 2
Special functions of machine monitor
2. Selecting sub menu
After the "Default" screen is displayed, select
"Unit" by using the function switches or
numeral input switches.
a Select this sub menu as in the case of
selecting a menu on the "Service Menu"
screen.
3. Selecting unit
After the "Unit" screen is displayed, select the
unit to be set by using the function switches.
q [F3]: Moves to lower item
q [F4]: Moves to upper item
q [F5]: Cancels the selection and returns
the display to the default screen
q [F6]: Validates the selection and returns
the display to the default screen
a Factory default is "SI Unit".
PC200, 200LC, 220, 220LC-8M0
Default (With/Without Attachment)
Use the menu of "Default" to check or change vari-
ous settings of the machine monitor and machine.
Use the sub menu of "With/Without Attachment" to
configure attachment setting when the attachment
is installed or removed.
1. Selecting the menu
Select "Default" on the "Service Menu" screen.
2. Selecting sub menu
After the "Default" screen is displayed, select
"With/Without Attachment" by using the func-
tion switches or numeral input switches.
a Select this sub menu as in the case of
selecting a menu on the "Service Menu"
screen.
3. Selecting With/Without
After the "With/Without Attachment" screen is
displayed, select the setting by using the func-
tion switches.
q Without Attachment: When attachment is
not installed
q With Attachment: For machines with pro-
vision for attachment
q [F3]: Moves to lower item
q [F4]: Moves to upper item
q [F5]: Cancels the selection and returns
the display to the default screen
SEN06128-00
39
30-102