Komatsu PC200-8M0 Shop Manual page 453

102 Testing and adjusting, Part 2
Special functions of machine monitor
Maintenance record
The machine monitor records the maintenance
information of the filters, oils, etc., which are dis-
played and checked by the following operations.
When maintenance is performed, if the remaining
time is reset in the operator mode, the number of
maintenance times is recorded in this record.
1. Selecting the menu
Select "Maintenance Record" on the "Service
Menu" screen.
2. Selecting maintenance item
After the "Maintenance Record" screen is dis-
played, select a maintenance item to be
checked by using the function switches or
numeral input switches.
q [F1]: Moves to the next page (screen)
q [F2]: Moves to the previous page (screen)
q [F3]: Moves to lower item
[F4]: Moves to upper item
q
q [F5]: Returns the display to the service
menu screen
a You may enter a 2-digit code by using the
numeral input switches to select the item
of that code.
PC200, 200LC, 220, 220LC-8M0
a The following items can be selected on
"Maintenance Record" screen.
49 Cleaning and replacement of cleaner
01 Engine Oil Change
02 Engine Oil Filter Change
03 Fuel Main Filter Change
41 Fuel Pre Filter Change
04 Hyd Oil Filter Change
05 H/Tank Breather Change
07 Damper Case Service
08 Final Drive Oil Change Interval
09 S/Machinery Oil Change
10 Hydraulic Oil Change
3. Items displayed on Maintenance Record
screen
The following information is displayed on the
screen.
(a): Maintenance items
(b): Replacement time elapsed up to present
(c): Service meter reading (SMR) at previous
replacement
SEN06128-00
33
30-102