Komatsu PC200-8M0 Shop Manual page 434

SEN06128-00
E-mode recommendation guidance
q
If light-load work continues for 10 or more min-
utes in P- or ATT/P-mode, E-mode recommen-
dation guidance is displayed. This function
helps reduce unnecessary fuel consumption
by alerting the operator to turn on E-mode.
a The lamp for the E-mode recommendation
guidance goes out automatically after 10
seconds has passed since it appeared, or
if the function switch [F5] is pressed.
Travel partial recommendation guidance
q
If machine travel in the travel mode Hi and the
fuel control dial at MAX continues for 2 or more
minutes, the travel partial recommendation
guidance is displayed. When traveling the
machine for a long period of time, moving the
fuel control dial from MAX to a lower position
helps reduce fuel consumption.
a The lamp for the travel partial recommen-
dation guidance goes out automatically
after 10 seconds has passed since it
appeared, or if the function switch [F5] is
pressed.
14
30-102
102 Testing and adjusting, Part 2
Special functions of machine monitor
Low fuel level guidance
q
If the amount of time the machine can be oper-
ated that is projected from the remaining fuel
level and the latest average fuel consumption
drops to less than 8 hours, the low oil level
guidance is displayed.
a The lamp for the low oil level guidance
goes out automatically after 10 seconds
has passed since it appeared, or if the
function switch [F5] is pressed.
Display of caution monitor
If an error that is serious enough to display Action
Level "L01" alarm monitor on the standard screen
or camera mode screen occurs, a large alarm mon-
itor is displayed on the screen once and is continu-
ously shown in window (a).
a On the camera mode screen, the alarm moni-
tor flashes at the left upper of the screen when
a caution is issued.
PC200, 200LC, 220, 220LC-8M0