Komatsu PC200-8M0 Shop Manual page 984

SEN06143-00
7. Remove cover (6).
8. Remove clamp (7).
9. Remove the mounting bolt and lift off muffler
assembly (8) to remove it.
4
Muffler assembly: 19 kg
10. Remove hose (10).
a MIKALOR clamp
a Mark the hose edge and tube to show the
original hose installation positions. (See
figure below.)
a If disconnecting air intake connector (C),
replace the gasket.
11. Disconnect radiator hoses (11).
12. Disconnect heater hose (12).
13. Remove fan guard (13).
22
50-200
Removal and installation of cylinder head assembly
[*2]
14. Disconnect ambient pressure sensor (14) and
boost pressure sensor connector (15).
[*3]
[*4]
a When disconnecting ambient pressure sen-
sor connector (14), move the lock to right
(R) and pull out the connector while press-
ing stopper (T).
a Move wiring harness to the left.
200 Engine and cooling system
PC200, 200LC, 220, 220LC-8M0