Komatsu PC200-8M0 Shop Manual page 425

102 Testing and adjusting, Part 2
Special functions of machine monitor
Operator mode (outline)
A Display of KOMATSU logo
A Display of inputting password
A Display of check of breaker mode
A Display of check before starting
A Display of warning after check before starting
A Display of ending of maintenance interval
A Display of check of working mode and travel speed
A Display of standard screen
A Display of end screen
B Selection of auto-deceleration
B Selection of working mode
B Selection of travel speed
B Operation to stop alarm buzzer
B Operation of windshield wiper
B Operation of window washer
B Operation of air conditioner/heater
Operation to display camera mode
B
(if camera is installed)
B Operation to display clock and service meter
B Check of maintenance information
Setting and display of user mode (including
B
KOMTRAX messages for user)
C Display of ECO guidance
C Display of caution monitor
C Display of action level and failure code
O (Special operation)
Function of checking display of LCD
D
(Liquid Crystal Display)
D Function of checking service meter
Function of usage limitation setting/maintenance
D
password
a Group of screens or functions in operator mode
A: Display or function from turning ON of starting switch to switching to the standard screen is over, and
display after starting switch is turned OFF
B: Display or function when the machine monitor switches are operated
C: Display or function when certain conditions are met
D: Display or function when operation of special switches is required
PC200, 200LC, 220, 220LC-8M0
Service mode
Monitoring / Pre-defined
Monitoring / Custom
Abnormality Record (Mechanical Systems)
Abnormality Record (Electrical Systems)
Maintenance record
Maintenance Mode Setting
Phone Number Entry
Default (Key-On Mode)
Default (Unit)
Default (With/Without Attachment)
Default (Camera)
Diagnostic Tests (Cylinder Cut-out)
Adjustment (Pump Absorption Torque (F))
Adjustment (Pump Absorption Torque (R))
Adjustment (Low Speed)
Adjustment (Attachment Flow Adjustment)
No Injection
KOMTRAX Settings (Terminal Status)
KOMTRAX Settings (GPS and Communication Status)
KOMTRAX Settings (Modem Information)
Service Message
SEN06128-00
5
30-102