Komatsu PC200-8M0 Shop Manual page 415

101 Testing and adjusting, Part 1
Installation and adjustment of mirrors
2. Adjustment of retractable mirrors
1) Adjust the retractable mirrors at position
(A).
2) With retractable mirrors (a1) and (b1)
open, loosen mirror bolts (1) and (2) and
stay mounting bolts (3) and (4) and adjust
the mirrors so that the operator can see
the right and left rear views best which are
blind corners from the operator's seat.
a Adjust the mirror so that the operator can
see persons (or things 1 m high and
approximately 30 cm in diameter) at the
right and left rear ends of the machine.
a Take care not to tighten stay mounting
bolts (3) and (4) (If they are tightened too
strongly, the stay may be broken since it is
made by die-casting).
PC200, 200LC, 220, 220LC-8M0
SEN06127-00
63
30-101