Komatsu PC200-8M0 Shop Manual page 455

102 Testing and adjusting, Part 2
Special functions of machine monitor
4. Contents of "Maintenance Notice Time Setting"
After selecting "Maintenance Notice Time Set-
ting", if the screen is displayed, select the
desired setting with the function switches.
q Default value: "Maintenance Notice Time"
set in machine monitor (Recommended by
the manufacturer and not changeable).
q Set value code: Maintenance interval that
can be freely set. Maintenance reminder
function works according to this set time in
operator mode (which is set in increments
of 10 hours).
q [F3]: Decreases set value
[F4]: Increases set value
q
q [F5]: Cancels setting before enter and
return to the "Maintenance Mode Change"
screen.
q [F6]: Enters selection and returns to the
"Maintenance Mode Setting" screen
PC200, 200LC, 220, 220LC-8M0
5. Setting of each maintenance item
After selecting each maintenance item to dis-
play its setting screen, perform the setting by
using the function switches.
q ON: Function of each maintenance item
selected is enabled in the operator mode
OFF: Function of each maintenance item
q
selected is disabled in the operator mode
q [F3]: Moves to lower set value
q [F4]: Moves to upper set value
[F5]: Cancels selection and returns to the
q
"Maintenance Mode Change" screen
q [F6]: Enters selection and returns to the
"Maintenance Mode Change" screen
a Even if ON/OFF of each item has been
set, if the above setting is changed, it
overrides the individual setting.
6. Contents of setting of set value of each mainte-
nance item
After selecting the set value of each mainte-
nance item, if the screen is displayed, perform
the setting for the item with the function
switches.
SEN06128-00
35
30-102