SEN06127-00
4.
Loosen mounting bolts (5) of camera (1) and
adjust installation (A) of camera so that the
side line of camera is matched with the corner
(B) of the bracket.
Angle (A): 48°(+2°/0)
a A part of the machine is displayed on the
monitor screen.
Adjust the camera so that the image of the
counterweight occupy approximately 10 to
15% of the monitor screen.
5.
After adjusting, tighten bolts (5).
3
Camera mounting bolt:
11.8 to 14.7 Nm {1.2 to 1.5 kgm}
6.
Install covers (2) and (3).
66
30-101
101 Testing and adjusting, Part 1
Angle adjustment of rear view camera
PC200, 200LC, 220, 220LC-8M0