"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3.5.1.6
Table 10
3.5.1.7
Table 11
3.5.1.8
Table 12
(1 of 2)
Issue: 10
shutdown
shutdown command
Item
Description
Syntax
[no] shutdown
Context
configure>system>time>ntp
Description
The shutdown command administratively disables the entity. When disabled, an entity does
not change, reset, or remove any configuration settings or statistics. Many entities must be
explicitly enabled using the no shutdown command.
The shutdown command administratively disables an entity. The operational state of the
entity is disabled as well as the operational state of any entities contained within. Many objects
must be shut down before they may be deleted.
Unlike other commands and parameters where the default state is not indicated in the
configuration file, shutdown and no shutdown are always indicated in system generated
configuration files.
The no form of the command puts an entity into the administratively enabled state.
Default
shutdown
user-user-hairpin
user-user-hairpin command
Item
Description
Syntax
[no] user-user-hairpin
Context
configure>system>
Description
This command allows the operator to configure user-to-user communication between ONTs
connected to the same LT (Hair-Pinning).
The no form of the command disables user-to-user communication.
Default
no user-user-hairpin
vlan-dot1q-etype
vlan-dot1q-etype command
Item
Description
Syntax
vlan-dot1q-etype etype
no vlan-dot1q-etype
3HH-11982-AAAA-TQZZA
System Management
31