Table of Contents
Advertisement
4
Installing and Replacing Network Interface Cards
10. Close the chassis assembly until it clicks into place.
11. Tighten the thumbscrews that hold the chassis assembly.
The system automatically restarts when the chassis assembly clicks into place.
Configuring and Activating Interfaces
The Nokia 60s or 100s appliance automatically detects any new NIC when the
system is restarted. Use Voyager to configure and activate the logical and
physical interfaces on the NIC.
For information about how to access Voyager and the related reference
materials, see
44
Chassis assembly thumbscrews
"To open Voyager"
on page 34.
Nokia 60s and 100s Installation Guide
00490
60s
00487
Advertisement
Table of Contents
Troubleshooting
