Sony DVS-9000SF User Manual page 71

1
In the <Mode> group, select the ripple modulation mode.
Radial: Points on radii of the same length from the center of the ripples
behave in the same way.
Angular: Points at the same angle from the center of the ripples behave in
the same way.
Both: Both Radial and Angular ripples are applied.
Shape: The ripples can have shapes such as stars or hearts in addition to
circles.
Modulation along radii
(Radial mode)
2
Set the following parameters, depending on the selected modulation mode.
• When Radial mode is selected
Knob Parameter
1 Amp R
2 Freq R
3 a)
Offset R
4 b)
Speed R
5 Amp A
a) Set when Lock is on.
b) Set when Lock is off.
• When Angular mode is selected
Knob Parameter
1 Amp A
2 Freq A
Modulation along periphery
(Angular mode)
Modulation modes and directions
Adjustment
Ripple amplitude along radius
Ripple frequency along radius
Direction along radius in which
to offset ripple phase and
amount of movement
Ripple direction along radius
and speed
Ripple amplitude along
periphery
Adjustment
Ripple amplitude along periphery
Ripple frequency along periphery
Setting values
0.00 to 100.00
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
DME Special Effect Operations
71