Copying or swapping light source settings
You can copy or swap the setting from one light source (Light 1 to Light 3) to
another light source. Use the following procedure.
1
2
3
To undo a copy or swap
Press [Undo]. Settings are returned to their values before the copy or swap.
Background Settings
This effect adds a color to the background of the image.
Applying the Background effect
Use the following procedure.
1
2
110
DME Special Effect Operations
In the Spot Lighting menu, press [Copy/Swap].
The Copy/Swap menu appears.
Two lists appear in the status area. The list on the left shows the copy or
swap sources, and the list on the right shows the copy or swap destinations.
Do one of the following to select the target data.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob
Parameter
Adjustment
1
Left No
Copy or swap source data
2
Right No
Copy or swap destination data
Press [Copy] to copy, or [Swap] to swap.
The data is copied or swapped.
In the DME menu, select VF6 'Input/Output' and HF1 'Bkgd.'
The Bkgd menu appears.
Press [Bkgd], turning it on.
The Background effect is enabled. You can adjust the parameters with the
knobs.
Setting values
1 to 3
1 to 3