Sony DVS-9000SF User Manual page 145

KF1 action setting
Variable Speed set
Cueup
– Partial operating limitation:
KF1 action setting
Start
Variable Speed set
Cueup
a) Failure to operate when variable speed is set to minus value. However, operates when the
file B action is set to Start, and then variable speed is set to minus after file B starts playing.
– Play does not switch from file A to file B:
KF1 action setting
Variable Speed set
Cueup
If play continues to show video of file A without switching to file B, a Stop
action is required in file A in order to switch to file B.
VTR/disk recorder timeline editing
This section describes how to set an action at a keyframe point, and how to edit
the VTR/disk recorder timeline.
For details of the operations for keyframe creation and editing, see "Creating
and Editing Keyframes" (page 166).
To set an action in the menu
Use the following procedure.
1
In the Device menu, press VF3 'DDR/VTR' and HF2 'Timeline.'
The Device>DDR/VTR>Timeline menu appears.
The status area shows two lists. The upper list shows the device name,
register number, keyframe number, and action type (start point, stop point,
and variable speed) set for the keyframe.
The lower list is used for setting the action for the device selected above,
and shows the port name, current time, status information, start point, stop
point, variable speed, and file name (for a disk recorder).
Operating status of file
A
Playing at variable speed Cueup
Cueup
Operating status of file
A
Playing
Playing at variable speed Variable Speed set
Cueup
Operating status of file
A
Playing at variable speed Start
Cueup
Control of VTRs and Disk Recorders
KF2 action setting
Cueup
KF2 action setting
a)
Variable Speed set
a)
a)
Variable Speed set
KF2 action setting
Start
145