Sony DVS-9000SF User Manual page 259

5
To set the source name display color, in the <LCD Color> group select the
color (Orange/Green/Yellow).
Using multi cross-point assign tables
In addition to the normal assignment ("main table"), as "cross-point assign
tables" you can create up to four "sub" tables (Sub1 to Sub4). However, you
can only carry out assignment of the video and key combinations in the Main
table.
You can select the table to be used for each of the following banks or buses.
• M/E-1 bank and PGM/PST bank
• Buses assignable to AUX delegation buttons
Use the following procedure.
1
In the Panel>Xpt Assign menu, press [Multi Xpt Assign].
The Multi Xpt Assign menu appears.
The status area shows the bank and bus names, and the cross-point assign
table.
2
Using any of the following methods, select the bank or bus.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
3
In the <Xpt Table Select> group, select the cross-point table you want to
assign.
Creating a "sub" table
To set the Sub table, use the following procedure.
1
In the Panel>Xpt Assign>Multi Xpt Assign menu, press [Sub Table
Assign].
The Sub Table Assign menu appears.
The status area shows a list of the sub table assignments.
Parameter Adjustment
Bank/Bus Bank or bus selection
Setup Relating to Operations From the Control Panel
Setting values
1 to 108
259